4G Repeater for home
Supported operators
Sprint Corporation

4G LTE Data Repeater


HiBoost Hi13-LTE2600

2-Year Warranty
Worldwide shipping
Delivery 2-5 Days
385 €
  • Network: 4G LTE 2600 MHz
  • Coverage: up to 500 sq m/ ≈ 5400 sq ft
  • LCD Display
  • Installation kit with all the components
  • Low power consumption
  • Longer mobile phone life
  • CE- and RoHS-certified
  • Full duplex
  • Overview

    HiBoost Hi13-LTE2600 is a smart solution for 4G data speed improvement. The equipment supports 4G LTE 2600 MHz frequency standard, on which all major mobile operators in Europe and worldwide perform.

    Hi13-LTE2600 has a gain value of 65 dB and is applicable to areas up to 500 sq m/ ≈ 5400 sq ft. You can use the system in your apartment, office, summer house, garage, basement and other medium-sized space. 

    The booster model comes with user-friendly LCD display, small and stylish.

    Buy 4G signal booster now and use high-speed 4G data with pleasure!

    *Mind that there should be at least 2-3 signal bars outside your house to provide your area with overall mobile signal enhancement. The booster coverage area also depends on building design peculiarities.

    **The higher dBm number, the more powerful signal is spread.


    HiBoost Smart Functions

    AGC and MGC

    HiBoost Hi13-LTE2600 booster is managed by intelligent software or AGC. It automatically adjusts best parameters for correct system performance.

    AGC provides mobile signal enhancement of exactly that level your area needs, basing on input signal strength. It eliminates noise and avoids interference with operator networks.

    There’s also Manual Gain Control (MGC), allowing you to regulate booster gain manually.  

    LCD Display

    LCD display helps you to keep watch over current booster state and such parameters as gain, frequency and output power. It will also display flashing alarms to warn you about wrong antenna position (ISO) or too strong input signal (ALC).

    Learn more about innovative LCD display.

    Safe and Healthy

    Certifications CE and RoHS

    All HiBoost models are issued certifications of CE and RoHS compliance. According to them the equipment meets European quality and safety standards and doesn’t contain hazardous substances.

    CE - Mandatory conformity marking for products sold within the European Economic Area since 1985. It proves that your product fulfills EU-wide safety, health and environmental protection requirements.

    RoHS - The Restriction of Hazardous Substances Directive 2002/95/EC. It restricts the use of six hazardous substances in electrical and electronic equipment: Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr6+), Polybrominated biphenyls (PBB) and diphenyl ether (PBDE).

    Longer Mobile Phone Battery Life

    Mobile signal booster also prolongs mobile phone battery life and saves you from excessive radiation. When the coverage in the area gets increased, mobile phone is able to pick up the signal and spends less energy.            

    What is dBm?

    dBm is an abbreviation that stands for power ratio (in decibels) of the measured power. The higher dBm number, the more powerful signal is spread.

    Thus, 23 dBm is more powerful than 13 dBm. This means not only larger coverage area, but also signal ability to go through walls, floors, etc.

    What is 4G LTE 2600 MHz?

    4G LTE is the fourth generation mobile network standard of high-speed 4G signal data transmission. Mobile operators share three 4G frequencies, at which they provide 4G data service on your mobile phones: 800, 1800 and 2600 MHz. In particular, Vodafone, O2, Orange, T-Mobile, Telenor, etc. support 4G LTE 2600.

    HiBoost Hi13-LTE2600 is suited for 4G LTE 2600 MHz. If you mobile carrier performs at it, it will provide fast data download in you place.

    Easy to Use

    4G signal booster is easily installed in 4 easy steps. Right after installation no adjustment is necessary. Just plug in the device and enjoy speedy 4G data download! 

  • RF Parameter
    Frequency RangeUplinkDownlink
    Max. GainUplinkDownlink
    Max. Output PowerUplinkDownlink
    MGC ( Step Attenuation )
    ≥ 31dB / 1dB step, dip switch control
    Adjust automatic, with auto shut off function
    Automatic Level Control
    ≤ 51
    ≤ 2
    Group Delay
    Mechanical Parameter
    I /O Port
    120*155*34 mm
    Package Weight
    2,74 kg
    Booster Weight
    0,75 kg
    Electrical Parameter
    Power Supply
    Input AC100~240V.50/60Hz, Output DC5V/3A
    50 ohm
    Environment Parameter
    Operating Temperature
    Relative humidity
    5% - 95%
    Barometric pressure
    55 kPa -106 kPa
    Environment Conditions
  • 4G mobile signal booster Hi13-LTE2600 comes in a full kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.

    STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).

    STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.

    STEP 3. Connect antennas and the booster with cables.

    STEP 4. Plug in the booster to a power supply and enjoy blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.

  • HiBoost Hi13-LTE2600 REVIEWS
    United Kingdom,  
    No complaints

    I purchased this one. Well, 4g signal is stable, no complaints from my side. Thank you for technical help, Jack

    What do you think about this product?


PDF icon Data Sheet
416.23 KB
PDF icon Manual
1.25 MB


Mobile signal booster
Mobile signal booster
Outdoor panel antenna + 15m cable
Indoor whip antenna
Power adaptor
385 €
Have a question? Contact us

Need Help?

Our Support Team is ready to answer all your questions.

(44)20 3239 5808
(33)970 448 896


Find your booster in 4 steps