Digital Dual Band Mobile Booster 10-20 dBm

Digital Dual Band Mobile Booster 10-20 dBm

DS10/15/20 Dual


2-Year Warranty
Worldwide Shipping
Delivery 2-5 Days

Dual band mobile phone boosters Huaptec DS10,15, 20 are high-power digital mobile signal repeaters for industrial use. The systems are aimed at cellular signal improvement in large-scale zones, allowing

Key features

  • Networks: EGSM+DCS/EGSM+WCDMA/DCS+WCDMA
  • Coverage: up to 800/1500/2000 m2
  • Multi-band and multi-channel
  • MGC and AGC functions
  • Noise level control
  • Local and remote control software (optional)
  • ETSI and 3GPP 3GPP2 technical standards
  • Overview

    Dual band mobile phone boosters Huaptec DS10,15, 20 are high-power digital mobile signal repeaters for industrial use. The systems are aimed at cellular signal improvement in large-scale zones, allowing mobile operators to economize on establishing new cell towers. The boosters are able to cover all kinds of areas from airports and railway stations to rural zones.

    Digital mobile phone boosters are adaptive systems. Each model is adjusted to the bandwidth the mobile provider works at. In case the operator changes its bandwidth, due to SDR technology the repeater allows setting a newone without changing the hardware.

    To make the digital repeater meet your needs, choose from below:

    Coverage area: DS10 – up to 800 m2 (10 dBm)
                           DS15 – up to 1500 m2 (15 dBm)
                           DS20 – up to2000 m2 (20 dBm)

    Pair of networks: EGSM+DCS/EGSM+WCDMA/DCS+WCDMA

    Features

    1) Multi-band and multi-channel
    DS10, 15, 20 dual band mobile phone boosters are adjusted to each client’s requirements. The equipmentsupports up to 8 sub-bands and 12 channels and work in good linear state.

    2) Noise floor level control
    The digital booster’s ability to select the necessary sub-bands helps to reduce noise floor level and make the system fully transparent for cell towers. It’s easily explained by the comparison with consumer boosters which cover wide band or in other words all possible sub-bands and increase noise in this way.

    3) Manual gain control (MGC)
    Thanks to MGC function it’s possible toregulate both uplink and downlink gain of the booster manually. This function helps to adapt the digital mobile booster to the existing outdoor signal reception conditions and provides the optimal coverage in the area.

    4) Automatic gain/level control (AGC, ALC)
    With the help of AGC and ALC circuits the booster automatically controls the gain according to the strength of input signals. AGC and ALC functions also eliminate the risk of interference with other BTSs and alarm in case of self- oscillation.

    5) OMT and OMC (Optional)
    OMT and OMC are integrated software circuits responsible for controlling mobile repeaters locally and remotely. OMT is designed to monitor up to 50 units at a time, while OMC – up to 2000 units. The monitoring software are optional and available as per customer's request.

     

    Reviews
  • RF Parameter
    Band width
    Supports up to 8 sub bands or 12 channels; bands are tunable and movable.
    MGC ( Step Attenuation )
    ≥ 31dB / 1dB step
    AGC
    ≧ 30dB, auto gain setting
    Gain Flatness
    Typ
    ≤ 3~10dB (p-p) as per frequency range and bandwidth
    WCDMA
    ≤ 2dB/ 3.84MHz
    Noise Figure
    ≤ 6dB
    V.S.W.R
    l≤ 2
    Group Delay
    ≤ 8μs
    LED Alarm
    Power LED
    Power indicator
    ALC LED
    Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB
    Software
    Local Monitoring
    PC via USB or Ethernet Port
    Remote Monitoring
    Via GSM or 3G Modem
    Controlled Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
    Monitoring Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
    Alarm Items
    Repeater Failure, DC Failure, ALC Alarm, PLL Failure
    Mechanical Parameter
    I /O Port
    N-Female
    Dimensions
    280*310*53 mm
    Booster Weight
    7 KG
    Electrical Parameter
    Power Supply
    Input AC100~240V,output DC12V/7A
    Impedance
    50 ohm
    Environment Parameter
    Operating Temperature
    -25ºC~+55ºC
    Relative humidity
    5% - 95%
    Environment Conditions
    IP40
    Barometric pressure
    55 kPa -106 kPa
Have a question? Contact us

Need Help?

Our Support Team is ready to answer all your questions.

Phone
(44)20 3239 5808
(33)970 448 896

E-mail
sales@huaptec.eu

Find your booster in 4 steps