Digital Dual System 23-27 dBm Digital Dual System 23-27 dBm

Digital Dual Band Mobile Amplifier 23-27 dBm

DS23/27 Dual


2-Year Warranty
Worldwide Shipping
Delivery 2-5 Days

Dual bands Huaptec DS23, 27 are high-power industrial mobile phone signal amplifiers, designed to extend cell phone coverage over large areas up to 4000 m2. The equipment is predisposed for mobile operators

Key features

  • Networks: EGSM+DCS/EGSM+WCDMA/DCS+WCDMA
  • Coverage: up to 3000/4000 m2
  • 8 sub-bands and 12 channels
  • ETSI and 3GPP 3GPP2 technical standards
  • Manual and automatic gain control
  • Noise level control
  • Local and remote control software (optional)
  • Overview

    Dual bands Huaptec DS23, 27 are high-power industrial mobile phone signal amplifiers, designed to extend cell phone coverage over large areas up to 4000 m2. The equipment is predisposed for mobile operators and large-scale businesses. The boosters support two networks within one system and are suitable both for indoor zones such as tunnels, shopping malls, business centers, etc. and open rural, urbanand industrial zones.

    Digital mobile phone amplifiers are fully adaptive for the needs of the client. Each booster is adjusted exclusively to the bandwidth, the mobile provider supports, and rejects the frequencies of the competitors. It’s easy to set a new bandwidth by the booster’s software as the device is empowered by SDR technology.

    Choose the following parameters for your digital booster:

    Coverage area: DS23 – up to 3000 m2 (10 dBm)
                           DS27 – up to 4000 m2 (15 dBm)

    Pair of networks: EGSM+DCS/EGSM+WCDMA/DCS+WCDMA

    Features

    1) Multi-band and multi-channel
    DC23, 27 dual band mobile phone signal amplifierssupport up to 8 sub-bands, which makes the booster have better linear phase or always stable gain level. The model also supports12 channels among which you can choose those, you need.

    2)Noise floor level control
    As far as the digital dual band booster is channel- and band-selective, it helps to reduce noise. If the booster supported all the sub-bands within one frequency band, the noise level would be much higher and it reduced BTS coverage and receiving sensitivity.   

    3) Manual gain control (MGC)
    MGC function gives an opportunity to control both uplink and downlink gain manually. It allows adapting the digital repeater to the signal reception conditions andensuring optimal coverage in the area.

    4) Automatic gain/level control (AGC, ALC)
    Thanks to AGC and ALC circuits the booster regulates the gain automatically in accordance with the strength of input signals. These functions also reduce the risk of interference with other cell towers, making mobile signal amplification more accurate and safe.

    5) OMT and OMC (Optional)
    OMT and OMC are monitoring software used tocontrol mobile repeaters locally and remotely. OMT is predisposed for50 units, while OMC monitor up to 2000 units, showing each separately. The software also differ in a number of additional functions like security management, alarm analysis, etc. These systems come optional and can be ordered additionally to the booster itself. 

    Reviews
  • RF Parameter
    Frequency RangeUplinkDownlink
    GSM900&UMTS
    DCS&LTE
    UMTS/LTE
    Max. GainUplinkDownlink
    DS23
    DS27
    Max. Output PowerUplinkDownlink
    DS23
    DS27
    Band width
    Available upon request
    MGC ( Step Attenuation )
    ≥ 31dB / 1dB step
    AGC
    ≧ 30dB
    Gain Flatness
    GSM
    ≤3dB (p-p)
    UMTS
    ≤ 2dB/ 3.84MHz
    Noise Figure
    Typical ≤ 6dB
    V.S.W.R
    Typical ≤ 2
    Group Delay
    ≤ 8μs
    LED Alarm
    Power LED
    Power indicator
    ALC LED
    Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB
    Software
    Local Monitoring
    PC via USB or Ethernet Port
    Remote Monitoring
    Via GSM or 3G Modem
    Controlled Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
    Monitoring Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
    Alarm Items
    Repeater Failure, DC Failure, ALC Alarm, PLL Failure
    Mechanical Parameter
    I /O Port
    N-Female
    Dimensions
    280*310*106mm
    Booster Weight
    10 KG
    Electrical Parameter
    Power Supply
    Input AC90~264V,output DC12V/15A
    Impedance
    50 ohm
    Environment Parameter
    Operating Temperature
    -25ºC~+55ºC
    Relative humidity
    5% - 95%
    Environment Conditions
    IP40
    Barometric pressure
    55 kPa -106 kPa

Package

Booster digital de signal mobile
Booster digital de signal mobile
Câble
Câble
Accessoires de montage
Accessoires de montage
Antenne intérieure (en option)
Antenne intérieure (en option)
Antenne extérieure (en option)
Antenne extérieure (en option)
Have a question? Contact us

Need Help?

Our Support Team is ready to answer all your questions.

Phone
(44)20 3239 5808
(33)970 448 896

E-mail
sales@huaptec.eu

Find your booster in 4 steps