Digital Quad System EDWL800 10-20 dBm

Digital Quad Band Cell Phone Booster EDWL800

DS10/15/20 Quad Band

2-Year Warranty
Worldwide Shipping
Delivery 2-5 Days

Huaptec DS10, 15, 20 are high-power cell phone boosters standardized for industrial use in compliance with ETSI and 3GPP 3GPP2. Digital boosters are used either to extend coverage area over remote rural

Key features

  • Networks: EGSM 900 MHz + DCS 1800 MHz + WCDMA 2100 MHz + LTE 800 MHz
  • Coverage: up to 800/1500/2000 m2
  • 8 sub-band and 12 channels
  • Manual and automatic gain/level control
  • Noise level control
  • Local and remote control software (optional)
  • ETSI and 3GPP 3GPP2 standards
  • Easy installation and use
  • Overview

    Huaptec DS10, 15, 20 are high-power cell phone boosters standardized for industrial use in compliance with ETSI and 3GPP 3GPP2. Digital boosters are used either to extend coverage area over remote rural or highly urbanized zones and ensure  specific areas of shopping malls, leisure centers, hotels, railway station, subways, etc. The quad band models support four systems in a single repeater –   EGSM 900 MHz, DCS 1800 MHz, WCDMA 2100 MHz and LTE 1800 MHz.

    Digital mobile phone repeaters are adjusted accurately to the bandwidth of a cell phone operator. Special digital filters in the repeater provide value of band rejection up to 50 dBc. Thanks to SDR technology, operator’s sub-bands and channels also can be easily changed by the software per client’s request.    

    Choose coverage areas for your digital cell phone booster:

    DS10 – up to 800 m2 (10 dBm)
    DS15 – up to 1500 m2 (15 dBm)
    DS20 – up to 2000 m2 (20 dBm)


    1)Multi-band and multi-channel
    Each band of DS10, 15, 20 industrial digital boosters support up to 8 sub-bands and up to 12 channels. Multi-band and multi-channel function provides 100% safe signal amplification of the operator’s networks, excluding any possibility of interference with other competitors’ networks.

    2) Noise floor level control
    Digital cell phone boosters are equipped with high quality noise level control, which makes it absolutely transparent for mobile providers.  Channel- and band-selectivity also reduces overall booster noise especially in comparison to mobile boosters for common consumers which amplify the bands of all mobile operators.   

    3) Manual gain control (MGC)
    This circuit gives a possibility to control the amplifying system gain manually according to the strength of input signals and outdoor signal reception conditions. The function saves the user from troubles with cell tower interference and makes mobile signal amplification safer.

    4) Automatic gain/level control (AGC, ALC)
    The circuits automatically regulate the repeater’s gain depending on the strength of input signals. AGC and ALC help to escape cell tower interference and provide signal amplification safe for users.

    5) OMT and OMC (Optional)
    OMT and OMC are monitoring software for local and remote control of up to 2000 boosters. Apart from monitoring the systems provide gain control, alarm report, alarm review and other functions. The software are optional and are available per customer’s request.

    6) Certifications
    Huaptec industrial cell phone boosters fully conform to CE and RoHS international certifications of safety and quality. The equipment also complies with the technical ETSI and 3GPP 3GPP2 standards.





  • RF Parameter
    Frequency RangeUplinkDownlink
    Max. GainUplinkDownlink
    Max. Output PowerUplinkDownlink
    Band width
    Available upon request
    MGC ( Step Attenuation )
    ≥ 31dB / 1dB step
    ≥ 30dB
    Gain Flatness
    ≤3dB (p-p)
    Typical≤3~6dB (p-p)
    ≤ 2dB/ 3.84MHz
    Noise Figure
    Typical ≤ 6dB
    Typical ≤ 2
    Group Delay
    ≤ 8μs
    LED Alarm
    Power LED
    Power indicator
    Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB
    Local Monitoring
    PC via USB or Ethernet Port
    Remote Monitoring
    Via SMS or GPRS
    Controlled Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
    Monitoring Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
    Alarm Items
    Repeater Failure, DC Failure, ALC Alarm, PLL Failure
    Mechanical Parameter
    I /O Port
    483*200*91 mm
    Booster Weight
    10 KG
    Electrical Parameter
    Power Supply
    Input AC90~264V
    50 ohm
    Environment Parameter
    Operating Temperature
    Relative humidity
    5% - 95%
    Environment Conditions
    Barometric pressure
    55 kPa -106 kPa


Digital mobile signal booster
Digital mobile signal booster
Indoor antenna (optional)
Indoor antenna (optional)
Outdoor antenna (optional)
Outdoor antenna (optional)
Have a question? Contact us

Need Help?

Our Support Team is ready to answer all your questions.

(44)20 3239 5808
(33)970 448 896


Find your booster in 4 steps