Digital Mobile Signal Repeater

DS37 Single


2-Year Warranty
Worldwide Shipping
Delivery 2-5 Days

Huaptec DS37 is a high power and high gain digital mobile repeater, used to optimize network coverage of mobile operators. The equipment suports 8 sub-bands and 12 channel

Key features

  • Networks: EGSM/DCS/WCDMA/LTE800/LTE1800/LTE2600 
  • Coverage: up to 7000 m2
  • ETSI and 3GPP 3GPP2 technical standards
  • Multi-band and multi-channel
  • MGC and AGC functions
  • Local and remote control software (optional)
  • Overview

    Huaptec DS37 is a high power and high gain digital mobile repeater, used to optimize network coverage of mobile operators. The equipment suports 8 sub-bands and 12 channel and works only within the adjusted bandwidth, not interfering with others. Thanks to SDR technology the system is totally adaptable. If the operator change or broadens its bandwidth, DS37 will automatically readjust it.

    Digital mobile booster Huaptec DS37 covers large indoor areas (tunnels, airports, subways, railway stations, shopping malls, etc.) and outdoor rural and urban zones up to 7000 sq.m.

    Choose for your digital mobile repeater:

    One network: EGSM/DCS/WCDMA/LTE800/LTE1800/LTE2600

    Features

    1) SAW filter technology
    Digital mobile repeater enhances only those signals which a certain mobile operator supports. The filter ensures strict band differentiation and rejection of the other operators’ sub-bands.

    2) Noise control
    Thanks to channel and band selectivity, noise level of Huaptec DS37 is exceptionally low. More simple systems which support all frequencies within one band, increase noise greately and risk of interferance with other mobile operators.  

    3) Automatic gain/level control (AGC&MGC)
    AGC and MGC circuits ensure automatic or manual adjustment of the system gain, depending on the strength of incoming cellular signal. It helps to proide more accurate cell phone coverage improvement and eliminate interference with other networks.

    4) Auto shut-off
    In case of serious self-oscillation, the mobile repeater will automatically shut off. It makes the system more transparent and dicreases the risk of interference with other operators’ networks.

    5) OMT and OMC (Optional)
    With the help of  OMT and OMC software it's easy to monitor from 100 boosters (OMT) to 3000 units (OMC) at a time. Pay your attention, that these remote control software are optional and available upon client request. 

    Reviews
  • RF Parameter
    Band width
    Available upon request
    MGC ( Step Attenuation )
    ≥ 31dB / 1dB step
    AGC
    ≥ 30dB
    Gain Flatness
    GSM
    ≤3dB (p-p)
    UMTS 2100
    ≤ 2dB/ 3.84MHz
    LTE
    Typical ≤3~6dB (p-p)
    Noise Figure
    Typical ≤ 6dB
    V.S.W.R
    Typical ≤ 1.5
    Group Delay
    ≤ 8μs
    LED Alarm
    Power LED
    Power indicator
    ALC LED
    Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB
    Software
    Local Monitoring
    PC via USB or Ethernet Port
    Remote Monitoring
    Via SMS or GPRS
    Controlled Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
    Monitoring Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
    Alarm Items
    Repeater Failure, DC Failure, ALC Alarm, PLL Failure
    Mechanical Parameter
    I /O Port
    N-Female
    Dimensions
    450*316*181 mm
    Booster Weight
    20 KG
    Electrical Parameter
    Power Supply
    Input AC90~264V
    Impedance
    50 ohm
    Environment Parameter
    Operating Temperature
    -25ºC~+55ºC
    Relative humidity
    5% - 95%
    Environment Conditions
    IP55
    Barometric pressure
    55 kPa -106 kPa
Have a question? Contact us

Need Help?

Our Support Team is ready to answer all your questions.

Phone
(44)20 3239 5808
(33)970 448 896

E-mail
sales@huaptec.eu

Find your booster in 4 steps