Digital Tri Band Mobile Phone Booster

DS10/15/20 Triple


2-Year Warranty
Worldwide Shipping
Delivery 2-5 Days

Huaptec DS10, 15, 20 are high-power mobile phone reception boosters standardized for industrial use. The equipment allows mobile operators to broaden the coverage area of their networks without establishing

Key features

  • Networks: EGSM 900 MHz + DCS 1800 MHz + WCDMA 2100 MHz
  • Coverage: up to 800/1500/2000 m2
  • Multi-band and multi-channel
  • Manual and automatic gain/level control
  • SDR technology
  • Noise level control
  • Local and remote control software (optional)
  • ETSI and 3GPP 3GPP2 standards
  • Overview

    Huaptec DS10, 15, 20 are high-power mobile phone reception boosters standardized for industrial use. The equipment allows mobile operators to broaden the coverage area of their networks without establishing new mobile towers. The models support three frequency bands in one system –   EGSM 900 MHz, DCS 1800 MHz and WCDMA 2100 MHz.

    Industrial mobile phone reception boosters are adjusted thoroughly to the bandwidths, at which cellular operator works. As the booster is empowered by SDR technology, set up sub-bands and channels are easily changed by the software according to the client’s requirements. Booster’s ability to work in specific sub-bands also adds to more quality and accurate noise level control.      

    Huaptec DS10, 15, 20 boosters are powerful enough (10, 15, 20 dBm) to provide excellent cellular signal over the areas up to 1500 m2. These industrial systems are applicable to large indoor areas such as airports, railway stations, shopping malls, rural or urban zones.

    Choose coverage area for your digital mobile phone reception booster:

    DS10 – up to 800 m2 (10 dBm)
    DS15 – up to 1500 m2 (15 dBm)
    DS20 – up to 2000 m2 (20 dBm)

    Features

    1) Multi-band and multi-channel
    Industrial digital tri band mobile repeaters support up to 8 sub-bands and up to 12 channels within each of three bands (i.e. each system supports 8 sub-bands and 12 channels). Multi-band and multi-channel functions allow not interfering with other competitors’ networks and adjusting the systems exclusively to the needs of the user.

    2) Noise floor level control
    Being channel- and band-selective, the booster provides efficient noise level control. Mobile boosters which amplify the bands of all mobile operators increase the risk of creating much more noise and interference with other operators’ BTSs.   

    3) Manual gain control (MGC)
    MGC circuit provides manual regulation of the system gain according to the strength of input signals. It helps to avoid interference with other networks.

    4) Automatic gain/level control (AGC, ALC)
    AGC and ALC circuits adjust the booster gain automatically depending on the outdoor signal reception conditions. The functions avoid cell tower interference and make signal amplification safe for users.

    5) OMT and OMC (Optional)
    OMT and OMC are monitoring software used to control signal boosters locally and remotely. The software provide such functions as gain control, alarm report, alarm review, etc. and differ in a number of monitored boosters (OMT-100 units, OMC-2000 units). These software are optional and are ordered per request.

    6) Certifications
    Huaptec industrial boosters conform to the industrial ETSI and 3GPP 3GPP2 technical standards. The equipment also fully complies with CE and RoHS certifications and is safe and healthy for users.

    Reviews
  • RF Parameter
    Band width
    Available upon request
    MGC ( Step Attenuation )
    ≥ 31dB / 1dB step
    AGC
    ≧ 20 dB
    Gain Flatness
    GSM
    ≤3dB (p-p)
    LTE
    Typical≤3~6dB (p-p)
    UMTS2100
    ≤ 2dB/ 3.84MHz
    Noise Figure
    ≤ 6dB
    V.S.W.R
    l≤ 2
    Group Delay
    ≤ 8μs
    LED Alarm
    Power LED
    Power indicator
    ALC LED
    Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB
    Software
    Local Monitoring
    PC via USB or Ethernet Port
    Remote Monitoring
    Via SMS or GPRS
    Controlled Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
    Monitoring Parameters
    Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
    Alarm Items
    Repeater Failure, DC Failure, ALC Alarm, PLL Failure
    Mechanical Parameter
    I /O Port
    N-Female
    Dimensions
    280*250*106 mm
    Booster Weight
    10 KG
    Electrical Parameter
    Power Supply
    Input AC100~240V,output DC12V/7A
    Impedance
    50 ohm
    Environment Parameter
    Operating Temperature
    -25ºC~+55ºC
    Relative humidity
    5% - 95%
    Environment Conditions
    IP40
    Barometric pressure
    55 kPa -106 kPa
Have a question? Contact us

Need Help?

Our Support Team is ready to answer all your questions.

Phone
(44)20 3239 5808
(33)970 448 896

E-mail
sales@huaptec.eu

Find your booster in 4 steps